top nav

Supplies

 

Materials and Supplies I used:

2 Ceiling Space Heaters
Howard Berger Ceiling-Mount Quartz Heater – 5120 BTU, 1500 Watts, Model# 125115

1 rotisserie motor (total package)
GrillPro 60090 Universal Heavy Duty Rotisserie Kit for Grills

 

dayton furnace fan blower

Dayton 1TDP7 PSC Blower, 115 Volt


2 Plug Outlets
Coleman Cable 03517 Flat Plug Extension Cord, 16/3 Grounded with 3-Outlet Trinector Tap, 6-Foot

2 x 4’s – approximately 50 ft

4 x 4’s – approx. 12 – 15 ft

2 x 2 – approx. 10 ft

1/8″ MFD board – 2 – 4’x8′ boards

4 rolls of foil tape

1.5″ PVC pipe (2 – 10ft Pipes)

1.5″ PVC caps (8)

Screen Stock 1/2″ x 1-5/8″ x 8′ – (1)

1/2′ x 4′ x 9′ foil polystryrene board (heat resistant insulation) –used inside dryer box.

Other Supplies:

  • 1 -3/8 Threaded Rod 36 inches
  • 2 -1/4  x  7.5″ Eye and eye Turnbuckle
  • 3 -1/2 x 1.5 Bolt
  • 3 -1/2 Hex Nut
  • 4 – 1/2 x2 washer
  • 5 -3/8 Hex Nut
  • 6 -Electrical Superstrut 1-5/8 x 10ft (metal framing channel)
  • 7 -4 inch corner braces
  • 8 -Nut of (6-32 x 1-1/2 round combo with nut)
  • 9 1/4 x 1″ washer
  • 10 4″ Crossbar
  • 11 -Bolt of (6-32 x 1-1/2 round combo with nut)

 

Using the supplies below and purchasing them all brand new will cost around $325. (w/o fan blower)